Software
Software
Videos
Erik was the idol in the plaster department during my apprenticeship.Everything that went through his analog hands became: a perfect model; beautifully socketed; precisely articulated.
This software is said to be his digital homage.
Highlights Fix-it-Erik
- „easy to use“ order card
- wizard guided process, no computer experience needed
- free choose of socket-type
- wax-up to short IOS-Scan
- smoothing/add/remove on the hole model possible
- CAD-file integration for Mock-up model
- free selection of Split-cast geometry und magnet-typ
- Penetration-protocol for adjusting occlusal contact points
- especially for 3D-printing designed honeycomb-structure
- signing with the patient name or the order number
- database for different model types
- STL, OBJ, PLY import and open STL export
Highlights Additional modul: Articulator
- plaster free articulation in all Articulator-Systems with 126 mm hight and Splitex-system.
- Only in Kombination with the hardware "Move" und "Lift" from Baumann-Dental.
- Together with the base plate EvoFlat (Baumann-Dental).
Highlights Additional module: implant models
- the flexibility in processing IOS data (intraoral scan data). The standard procedure is to import a scan abutment scan and an emergence profile scan, which are assigned to each other in the software (matching). However, it is also possible to work with just one scan abutment scan. The software then automatically calculates the scan abutment from the data set and the emergence profile can be designed by entering parameters. In addition, several scan abutment or emergence profile scans can be matched directly in the software to form a data set in order to fit the model analogs and create the models. Implant models in the upper jaw and lower jaw in occlusion can be created together.
- the fit parameters (offset) of the analogues for 3D printing can be set separately in the XY and Z dimensioning.In this way, the height discrepancy between the implant and the analog model can be avoided by making the necessary adjustments to the inaccurate pressure. All entries can be set independently for each implant analog. Presettings (default values) related to the implant type can be stored in a database.
- The libraries of the model analogues from Straumann, Camlog, Medentica, Dentaurum, NT-Trading and Rübeling&Klar are available. The libraries will then be successively expanded and updated according to user requirements.
In collaboration with: Dental Laboratory Volkmer GmbH & Co.KG
Highlights
- "easy to use" order management
- wizard guided process, no computer experience needed
- automatic cut-off detection
- additional blocking function "swish"
- fully automatic detection of the boundary line
- blocking function cylinder for construction of open base plates (implantology)
- individual area for additional hollowing (spacer) eg at the palate seam, freely determinable
- different edge design (dimensioning) freely determinable at each point
- rapid construction of retentions or holes by marking a complete area
- signing with the patient name or the order number
- upper- and lower-jaw construction at the same time
- fully automatic calculation of the needle pin and the plate
- direct bitewall adjustment
- show and hide Situ-Scan
- standard trays for first impression taking
- STL, OBJ, PLY import and open STL export
In collaboration with:
Dental Laboratory Herzing AG
- wizard guided process
- automatic best-fit alignment
- restriction of the fit area
- meaningful color representation of the deviations
- generated test report with logo and screenshots
- Analyse of wall thickness and construction from STL
- feeding with a shrinkage factor to match ZrO2 frameworks / data before sintering
- STL import and PDF export
Shoemaker
3D-Designsoftware for Horseshoes